3-1/4" Flush Cut Serrated Knife Edge Sealant Cutter
title
3-1/4" Flush Cut Serrated Knife Edge Sealant Cutter
- Buy 3 for CA $6.99 each and save 13%
- Buy 10 for CA $5.99 each and save 25%
- Buy 30 for CA $4.99 each and save 38%
Additional Information
Best for cutting | removing deeper seated silicone, caulking & soft glue |
---|---|
Blade Width | 1 inch to 1/16" at tip X .055 inch material thickness |
Material | Stainless Steel |
TPI (Teeth Per Inch) | 12 |
Plunge Depth | 3-1/4 inch |
Transform your multi-tool into an aggressive penetrating sealant remover. This 3-1/4 inch long knife features sharp serrations along both edges of this tapered blade to facilitate quick penetration into deep joints.
Ideal for long reach separation of bonding materials. Use this tapered sealant cutter to remove adhesives, soft caulking, silicone or any gummy materials away from a desired work surface.
The step-down flush-cut profile design allows the operator to lay the blade body flat against the work surfaces for controlled scraping.
This very aggressive serrated knife edge blade is only recommended for use with robust multi-tool machines operating above 2.0 amps.
WARNING: Please take note: This extra long cutter is only recommended for experienced multi-tool users. Longer blades put higher working loads on your multi-tool. Please listen to your machine when using this cutter to avoid motor stalls or burnout failure.
Special Alert for Bosch MX30E & MXH180B model owners: Please be aware that this item and any of our other 'Quick Release' accessories, will NOT suitably lock-fit onto your Bosch Tool-less Blade change multi-tool model without our C-Clip Adapter.
Special Alert for Dremel MM35, MM40, MM45 & MM50 model owners: Please be aware that this item and any of our other 'Quick Release' accessories, will NOT lock-fit onto your Dremel Tool-less Blade change model without our C-Clip Adapter.
Special Alert for Black & Decker 'Matrix' & Craftsman 'Bolt-On' model owners: Please be aware that this item will NOT suitably pin-lock into your cordless multi-tool head.
Special Alert for new Bosch StarLock & Fein StarLock model owners: Please be aware that this item and any of our other accessories, will NOT fit your 2016 or newer machines if utilizing the new 'bottle-cap' style blade anchoring system.
These blades or attachments are compatible with the following machines:
- AEG Multitools
- Batvia Multitool
- Blue Hawk Oscillating Tool
- Bosch Multi-X (except new 'bottle-cap' style anchor starlock models)
- Bosch Multi-X with blade change lever (except new 'bottle-cap' style anchor starlock models)
- Channellock Oscillating Tool
- Chicago Electric Multi Tool
- Clarke CMFT250
- CMT
- Craftsman (except 2019 & newer models)
- Dremel Multi-Max (Except MM35, MM40, MM45, MM50 & Velocity models)
- Einhell
- Fein Multimaster (except new 'bottle-cap' style anchor starlock models)
- Ferm
- Force 2.2 Amp
- Genesis (except models with blade change lever)
- Grizzly
- GTV Oscillating Tool
- Haakon Multi Function Tool
- Hardin
- Hart 20V Multi-Tool
- Haussmann 5-in-1
- Hitachi Multi-Tool
- Hyper Tough Oscillating Tool
- i-Drill Multi Tool
- IIT Multi Function
- Kawasaki
- King Canada
- Klutch
- Kwiktool USA
- LUX Tools MFW220
- Makita (non Starlock models)
- Mastercraft
- Masterforce Utila (Except model 2410854)
- Master Mechanic
- Metabo Multi Tool
- Milwaukee
- Norge
- Ozito
- Parkside (except PMFW 280 A1)
- Performax
- Pitbull
- Power IT Multi-Tool
- Powerfist Multi-Purpose
- Powerstroke
- Project Partners
- Project Pro
- Renegade Industrial Multitool
- Ridgid Jobmax
- Ryobi Jobplus
- Samona (Rok) Multi-Tool
- Shop Basics
- Shop Series SS5120 Sonic Tool
- Skill Multi-Tool
- SunZi Multi-Tool
- Task Force
- Taurus Multi Function
- Terratek Multi-Function
- Tooluxe Multifunction
- Tool Shop
- TradeMaster
- Trades Pro
- Vibrarazer
- VonHaus
- Voss
- Warrior
- WEN
- Western Hawk
- Westfalia
- Wolf
- Workzone
- XU1 Multi Function