My Cart(Items) 
3-1/2" Flush Cut Tapered Sealant Cutter
title
3-1/2" Flush Cut Tapered Sealant Cutter
- Buy 3 for CA $4.99 each and save 29%
- Buy 10 for CA $4.49 each and save 36%
- Buy 30 for CA $3.99 each and save 43%
Additional Information
| Best for cutting | removing deeper seated silicone, caulking & soft glue |
|---|---|
| Blade Width | 1 inch to 1/8 at tip X .058 inch material thickness |
| Material | Stainless Steel |
| TPI (Teeth Per Inch) | N/A |
| Plunge Depth | 3-1/2 inch |
Transform your multi-tool into a deep penetrating sealant remover. This 3-1/2 inch long blade features sharp tapered edges on both sides for very deep joints. Ideal for long reach removal of bonding materials. Use this tapered sealant cutter to remove adhesives, soft caulking, silicone or any other gummy material away from a desired work surface.
The step-down flush-cut profile design allows the operator to lay the blade flat on a working surface for consistent controlled scraping.
This Supercut inspired blade design is only recommended for heavier duty multi-tools operating at higher amperage's.
WARNING: Please take note: This extra long cutter is only recommended for experienced multi-tool users. Longer blades put higher working loads on your multi-tool. Please listen to your machine when using this cutter to avoid motor stalls or burnout failure.
Special Alert for Dremel MM35, MM40, MM45, MM50 & Velocity model owners: Please be aware that these closed anchor style accessories will NOT suitably fit your Quick Release Tool-less Blade change Dremel models.
Attention 2019 and newer Craftsmen #CMEW400 & #CMCE500D1 model owners: Please be aware that our closed anchor style accessories will NOT fit your blade change system. Please select from our Quick Release Arbor Category.
Special Alert for new Bosch StarLock & Fein StarLock model owners: Please be aware that this item and any of our other accessories, will NOT fit your 2016 or newer machines if utilizing the new 'bottle-cap' style blade anchoring system.
These blades or attachments are compatible with the following machines:
- AEG Multitools
- Batvia Multitool
- Blue Hawk Oscillating Tool
- Bosch Multi-X (except new 'bottle-cap' style anchor starlock models)
- Bosch Multi-X with blade change lever (except new 'bottle-cap' style anchor starlock models)
- Channellock Oscillating Tool
- Chicago Electric Multi Tool
- Clarke CMFT250
- CMT
- Craftsman (except 2019 & newer models)
- Dremel Multi-Max (Except MM35, MM40, MM45, MM50 & Velocity models)
- Einhell
- Fein Multimaster (except new 'bottle-cap' style anchor starlock models)
- Ferm
- Force 2.2 Amp
- Genesis (except models with blade change lever)
- Grizzly
- GTV Oscillating Tool
- Haakon Multi Function Tool
- Hardin
- Hart 20V Multi-Tool
- Haussmann 5-in-1
- Hitachi Multi-Tool
- Hyper Tough Oscillating Tool
- i-Drill Multi Tool
- IIT Multi Function
- Kawasaki
- King Canada
- Klutch
- Kwiktool USA
- LUX Tools MFW220
- Makita (non Starlock models)
- Mastercraft
- Masterforce Utila (Except model 2410854)
- Master Mechanic
- Metabo Multi Tool
- Milwaukee
- Norge
- Ozito
- Parkside (except PMFW 280 A1)
- Performax
- Pitbull
- Power IT Multi-Tool
- Powerfist Multi-Purpose
- Powerstroke
- Project Partners
- Project Pro
- Renegade Industrial Multitool
- Ridgid Jobmax
- Ryobi Jobplus
- Samona (Rok) Multi-Tool
- Shop Basics
- Shop Series SS5120 Sonic Tool
- Skill Multi-Tool
- SunZi Multi-Tool
- Task Force
- Taurus Multi Function
- Terratek Multi-Function
- Tooluxe Multifunction
- Tool Shop
- TradeMaster
- Trades Pro
- Vibrarazer
- VonHaus
- Voss
- Warrior
- WEN
- Western Hawk
- Westfalia
- Wolf
- Workzone
- XU1 Multi Function